Contemporary Courtyard Gate Hardware with Deadbolt | December Photo Drawing Winner!

Products in this post:

 Nero Contemporary Lever Gate Latch
(Build Your Own Package)

The Nero Contemporary Gate Latch is a modern gate latch. 

If you're looking for a modern lever gate latch, this stainless steel gate latch is excellent for coastal locations. The Nero Latch is crafted of stainless steel and aluminum, then powder-coated satin black for protection against the elements. The lever handles are spring-loaded for smooth operation.

The Nero Latch fits gates up to 5-1/2" thick; specify gate thickness with order.

The Nero Contemporary Gate Latch accommodates both in-swinging and out-swinging gates. The latching portion of the set is installed on the side of the gate that it swings toward. 

The Nero Contemporary Lever Gate Latch is proudly made in Portland, Oregon. Your purchase supports a small business and we appreciate it!  

Details for this gate latch

  • Material: Stainless Steel and Aluminum
  • Mechanism: Spring-Loaded
  • Backset: 2-3/8"
  • Finishes available: Satin Black powder coat
  • Set includes mounting hardware
  • Fits gates up to 5-1/2" thick. 
  • Operable from both sides.
  • Suitable for in-swinging and out-swinging gates. 
  • Handing required with order. 
  • Lockable| See "Related Products" below for locking options

Dimensions of this stainless steel latch

  • Plate: 2-1/2"w x 5"h
  • Handle: 4-3/4"l x 3/4"w x 1/2" th
  • Latch-arm length: Arm extends 2-3/16" from edge of plate
  • Strike: 3-1/4"h x 1-1/2"w x 3/16"thick
  • Projection: 2-3/8"
Options

Locking

  • We offer a coordinating deadbolt in Satin Black for a complete ensemble. Deadbolts are available in either single or double cylinder, depending on your needs. (Choose Satin Black as the finish when adding the deadbolt to your cart). Single cylinder deadbolt fits gates up to 5-1/2" thick, while the double cylinder deadbolt will fit gates up to 2-5/8" thick.  

    square-inside.jpg 

Gate Stop
  • All wooden gates need a gate stop installed. Each Nero latch set includes a gate stop (coordinating Satin Black finish).  Gate stops prevent hinge, latch, and gate damage and prolong gate life. Check out the video of gate stop installation down at the bottom! 
Technical Info

Hardware Tips

To learn more about stainless steel hardware, care, and maintenance, visit our help page

Take a look at the Gate Hardware section of our blog for helpful suggestions. 

Resources

NOTEView or Download a cutsheet of the Nero Latch here.

Please review our Resources page for general information about all our products.

FAQs

Read our FAQs for additional information about various products and policies.

Take a look at the Answering Customer Questions section of our blog for a deeper look at same of our product types and manufacturers.

Product Images
We're always looking for new photos of our hardware installed on your projects! Send us your photos for a chance to win $100 off your next order!
russell-fong-custom-cedar-gate-with-emtek-emtouch-keypad-deadbolt-and-nero-contemporary-latch.jpgnero-contemporary-gate-latch-on-stainless-gate-at-contemporary-farmhouse.jpgstainless-steel-gate-fence-with-nero-modern-gate-latch.jpgNero Contemporary Lever Gate Latch Pkg for Single Gates Nero Single Installed Side ViewNero Contemporary Lever Gate Latch Pkg for Single Gates Nero Double Installed Side ViewNero Contemporary Lever Gate Latch Pkg for Single Gates Nero Double InstalledNero Contemporary Lever Gate Latch Pkg for Single Gates Nero Single Installed CloseupNero Contemporary Lever Gate Latch Pkg for Single Gates Nero Single Installed Gate FrontNero Contemporary Lever Gate Latch Pkg for Single Gates Nero Single Installed Gate Backnero-contemporary-lever-handle-gate-latch-360-yardware.jpegnero-contemporary-gate-latch-360-yardware-paul-keyes.jpgsturdy-gate-build-using-wood-and-metal-360-yardware-contemporary-nero-lever-latch.jpg360-yardware-nero-contemporary-gate-latch-lever-handle.jpg

18" Stainless Steel Cane Bolt
with Black Powder Coat Finish

 

This is a heavy duty cane bolt for fixing one side of a double gate or door opening. It can also be used as a heavy duty horizontal slide bolt, or to bolt the top of a door to the head jamb.

This 18" Stainless Steel Cane Bolt has a satin black powder coat finish. We've included a bushing at each friction point to ensure smooth operation.

The brackets are made from type 304 stainless steel, the cane is type 304 stainless steel, and the screws are type 18-8 stainless steel.

Overall cane dimensions are 5/8" x 4-1/4" x 18". Brackets are 1-1/2" in width and project 1-3/4", with the guide bracket measuring 3-5/8" in height, and the combination guide/hanger bracket measuring 3-7/8" in height. Strike plate measures 1-1/4" x 4" with two screw holes and one hole for the bolt to pass through.

Details

  • Standard configurations allow for a minimum of 2" of engagement
  • The cane has a tapered end to facilitate engagement in the adjacent surface
  • Each kit includes stainless steel fasteners with a matching finish and a stainless steel roll pin
  • A hole for the roll pin is positioned to prevent the cane from being withdrawn from the lower bracket during normal operation and also from being easily removed altogether
  • Includes strike plate

Package Includes

  • 1 Solid 5/8" Cane
  • 1 Guide Bracket
  • 1 Combination Guide/Hanger Bracket all in matching finish
  • 1 Strike Plate with #12 x 1-1/4" fasteners
  • Also included is a stainless steel roll pin, which can be inserted so that the cane bolt can't be pulled all the way out
  • Fasteners included for cane bolt brackets are #12 x 1"
Options

There are no other options available for this cane bolt. 

Alternate Configurations
There are no other configurations available for this cane bolt. 
Technical Info

Hardware Tips

Take a look at the Gate Hardware section of our blog for helpful suggestions. 

Resources

View cutsheet here.

Maintenance

maintenance-instructions.jpg

To learn more about stainless steel hardware, care, and maintenance, visit our help page.

Please review our Resources page for general information about all our products.

FAQs
Read our FAQs for additional information about various products and policies.
Take a look at the Answering Customer Questions section of our blog for a deeper look at same of our product types and manufacturers.
Product Images
We're always looking for new photos of our hardware installed on your projects! Send us your photos for a chance to win $100 off your next order!

Solid Brass Deadbolt - Square Style

Emtek deadbolts provide security in an attractive package. Emtek deadbolts have solid brass cylinders, housings, collars, and rosettes. Available in all finishes and in Single or Double Keyed functions.

Emtek brass deadbolts fit doors of this thickness:

  • Single cylinder deadbolts can fit doors and gates up to 5-1/2" 
  • Double cylinder deadbolts can fit doors and gates up to 2-5/8"

Details:

  • Comes with two keys
  • Deadbolt plate measures 2-1/2" x 2-1/2"
  • Schlage Keyway
  • Standard 2 1/8" Door Prep
  • Solid Brass Cylinder
  • Sandcast Bronze Collar
  • Hardened Steel Bolt
  • Heavy Gauge Steel Understrike and brass trim strike shipped with every deadbolt

emtek-logo.jpg

Options
Finishes
  • Oil-Rubbed Bronze
  • Flat Black
  • Satin Black to match 360 Yardware gate latches (Oval or Nero)
Backset 
  • 2-3/8"
  • 2-3/4" 
Cylinder Type 
  • Single cylinder
  • Double cylinder 
Gate Thickness
  • Single cylinder deadbolts can fit doors and gates up to 5-1/2" 
  • Double cylinder deadbolts can fit doors and gates up to 2-5/8"

Keyed Alike

  • When you need to order multiple locks and want them to all be operable by the same key.
Technical Info

Hardware Tips

Maintenance: We recommend periodic greasing of the interior of the deadbolt, so that the deadbolt withstands the outdoor elements.

If you're considering a deadbolt for your project, please read through our page "What You Need To Know: Using Deadbolts for Gates."

what-you-need-to-know-about-deadbolts.png

Take a look at the Gate Hardware section of our blog for helpful suggestions. 

Resources

Please review our Resources page for general information about all our products.
FAQs
How do I prepare my door to install this deadbolt?
Read our FAQs for additional information about various products and policies.
Take a look at the Answering Customer Questions section of our blog for a deeper look at same of our product types and manufacturers. 

We so appreciate getting your project photos, even in the midst of the holiday bustle!!

Our December winner combined our Contemporary Nero Gate Latch with a Modern Brass Square Deadbolt and a Stainless Steel Cane Bolt. This sapele gate encloses a sunroom and as you can see, is beautifully finished with our satin black hardware. Shannon Williams is a true artisan! If you’re in the Santa Cruz, California, area, reach out and get in touch with him!

nero contemporary gate latch with stainless steel cane bolt and square modern style brass deadbolt from 360 yardware  360 yardware square modern style brass deadbolt with nero contemporary gate latch and stainless steel cane bolt

 

 

 

 

 

 

 

 

Another photo we received features our Oval Contemporary Gate Latch, which is spring-loaded.

360 yardware oval contemporary lever gate latch

 

 

 

 

 

 

 

 

 

Thank you, as always, for these lovely submissions!